Best light gray gallon and caliper paint online store right now? Farm, industrial, marine commercial, and construction industries all use POR-15 Rust Preventive Coating to protect expensive and valuable equipment against rust, abrasion, and even graffiti. POR-15 Rust Preventive Coating also has excellent “surface tolerance”, which means it works very well on porous surfaces, such as wood, fiberglass, concrete, and bricks. Try some for yourself!
Fix that seam or channel with POR-15 Patch. For years our customers have asked us for a thicker version of our world famous POR-15 Rust Preventive Coating, to use for filling seams or holes. Here it is! POR-15 Patch is quite literally POR-15 Rust Preventive Coating in a tube, and it dries as hard as a rock, remains flexible, and once dry is totally impervious to fuels and solvents. It’s so tough it may actually add strength to weakened metal, and it won’t absorb moisture and swell like conventional body fillers. Try it yourself, it’s incredible! Patches holes or cracks in steel, wood, and some plastics.
POR-15 Rust Remover will safely remove light to even heavy rust completely from metal surfaces and will not affect plastic, PVC, Viton, or most paints. One gallon derusts several hundred pounds of heavily rusted steel, this equates to around 1/2 to 3/4 pounds of dry rust removed per gallon. Rust Remover will not harm unrusted steel and is safe on other metals. Rust Remover has no fumes or bad odors and no VOCs. No sanding or scrubbing required. POR-15 Rust Remover works in as little as 20 minutes for light rust or overnight for heavy rusted metal. All of the rusted areas must be submerged in the Rust Remover for it to work. When all of the rust has been removed, rinse the metal pieces with water. POR-15 Rust Remover works in as little as 20 minutes for light rust or overnight for heavy rusted metal. For best results use POR-15 Cleaner Degreaser to clean parts before using POR-15 Rust Remover. Read more information at rust remover.
Remove all four wheels from vehicle. Calipers don’t need to be removed. Don’t remove brake line. Clean surfaces to be painted with POR-15 Cleaner Degreaser. Spray on the cleaner and brush the dirt, grease and grime with a small scrub brush or toothbrush. Wear protective gloves and glasses when cleaning your calipers. Read directions on POR-15 Cleaner Degreaser container before using. Rinse cleaned caliper thoroughly with water and dry with clean towel. Now apply POR-15 Metal Prep and keep surface wet for 20 minutes and then wash off POR-15 Metal Prep with water and dry thoroughly.
Rust conversion products claim to change the chemical nature of rust and convert it to a more stable element that won’t rust again. History of the failure of these products is well documented; most simply don’t work for more than a few months at best, and they are subject to the same chipping and cracking that occurs with ordinary rust coatings. POR-15 works because it chemically bonds to rusted metal and forms a rock- hard, non-porous coating that won’t crack, chip, or peel. It keeps moisture away from metal with a coating that is strengthened by continued exposure to moisture. Read additional details on https://por15.com/.