Looking to purchase high quality split wire loom? Here are some tips and extra details helping you to make the best pick. Liquid-tight flexible metal conduit (LFMC) is a special type of flexible metal conduit that has a plastic coating and is used with sealed fittings to make it watertight. It is commonly used with outdoor equipment, such as air conditioner units.
Rigid polyvinyl chloride conduit is plastic tubing that’s sort of a thin version of PVC plumbing pipe (and is usually gray instead of white). It can be heated and bent to change direction but is more commonly routed with elbow fittings. Connections are solvent-glued, similarly to the way PVC plumbing pipe is handled. The glued connections make the raceway watertight, so PVC can be used for outdoor and underground applications, as well as for dry and even corrosive locations. Because PVC is nonconductive, this conduit cannot serve as a ground path.
Intermediate Metallic Conduit or IMC is lighter weight, metallic conduit and is rated as stronger than other rigid conduit. IMC was first produced by Allied Tube & Conduit. IMC, provided in both threaded IMC and non-threaded IMC forms, is a rigid metallic conduit tubing, typically hot-dipped galvanized steel or stainless steel. The interior of galvanized steel IMC is usually coated with an anti-corrosion layer. Threaded IMC is joined by threaded couplings, C condulets, sweeps and bends. The tubing is cut with a pipe cutter or tubing cutter, and then threads cut using a thread cutting tool. When cutting IMC, take care to remove burrs on the tubing interior that would otherwise damage electrical wires being pulled through the conduit. See more info at flexible plastic conduit.
The flexible metallic tubing (FMT) is made to give great flexibility and includes a metallic tube-like design. It really is very easy to route or shape to fit probably the most difficult areas. That is why it is great to utilize on the do-it-yourself projects where it is much better to not join multiple components of Stainless Steel Flexible Conduit together. Also, this kind of tubing does not feature any form of waterproof protection.
The ID and OD means inner diameter and outer diamter of flexible conduit. OD is the maximum of flexible conduit, and is a fixed number that can not be deviated from. Flexible conduit are always corrugated inner and outer, so we’d better leave more space inner to make wires and cables easier to through. So we should leave 20% space based on inner diameter. It may sound backward but use the diameter of the conduit as a guide to the service needed. It is better to use a conduit that is too big than one that is too small.
CorrugatedConduit.com offer a wide selection of corrugated plastic flexible conduit and flexible metal conduit to fit your needs. All of our flexible conduit meet ROHS, SGS specifications as durable and are resistant to low level acides and alkalis. These flexible conduit are also designed for wire and cable protection well. Here are you can find a full sizes of all kinds of plastic & metal flexible conduit. Whether your application requires plastic conduit, split conduit, metal conduit and other applications. You will find what you need here. Read additional details on https://corrugatedconduit.com/.