Top rated hydraulic press machine manufacturer and supplier in China? Hydraulic transmission is adopted, and the slider part is composed o slide, an oil cylinder and a fine-tuning structure of a mechaicl stoper. Te left and right oil cylinders are fixed on the frame, the piston (rod) drives the slider to move up and down through hydraulic pressure, and the mechanical stop is controlled by the numerical control system to adjust the value; Workbench part: controlled by the button box, the motor drives the stopper to move back and forth, and the moving distance is controlled by the numerical control system. The minimun reading is 0.01 mm (the front and rear positions have travel switch limits). Find even more information at power press machine manufacturers.
The repeatability of the slider of the CNC bending machine is 0.0004 inches, and the precise angle of forming must use suchprecision and a good mold. Therepeatilty of the lder o the hand-controlled bending machine is +0.002 inches, and the deviationo t2-3 is geneally generated under the condition of using a sutable mold. In addition, the Cc bending machine is ready for rapid mold assembly. When many small batches of parts need to be bent, this is an indisputable reason for consideration.
Through this partnership of shared experience and ideas, we are confident that we can realize your current and future requirements on WORLD press machine. World has been committed to the development and production of power press machines since it was established in 1953. More than 100 experienced engineers are working in the three R&D centers, one in Shanghai, one in factory and another one in Ningbo.
Carefully consider the material grade and the maximum processing thickness and lengh. If most of the work is lowcarbon steel with a thickness of 16 gauge and a maximumlengh of 10 feet (3.048 meters), then the free bending force does not need to be greater than 50 tons. However, f yu are engaged in alarge number of bottomed die forming, perhaps a 160-ton machine toolshould be considered. Assuming that the thickest material is 1/4 inch, a 10-ot re bending requires 0 tos, and a botomed die bending (corected bendg) requre atleast o00tos. If mos prtsare 5feet or shorter, the tonnage is almost halved, which greatly reduces the cost of purchase. The length of the part is very important for determining the specifications of the new machine.
World Precise Machinery (China) is the biggest branch factory of World Group which is focusing on producing and technology researching of power press machines. The original factory was built in 1953 to produce small eccentric punching machines for new China industry. World Group bought this factory in 1998 and expanded the production capacity and the product ranges. Now World can supply power press capacity from 6.3ton to 2500ton, C fame and H frame crank press, tie-rod and mono block type eccentric gear press, hydraulic shearing machine and bending machine (press brake), fiber laser cutting machine and the automatic accessories such as decoiler, straightening machine and roller NC feeder. Discover more information at pressmachine-world.com.