Best ignition coil supplier: These multiple-coil-pack-systems are much more reliable than the distributors of the past, but individual ignition coils can still fail over time and lead to an engine misfire condition. When a cylinder misfires, that means the fuel inside it is not burning at the correct time or not burning at all. This is also sometimes referred to as a dead cylinder. Prolonged misfiring can lead to larger problems like warped piston rods or corrosion inside the cylinder wall. It can also cause unburned fuel to leak into your exhaust system, which is bad for the environment and worse for your car’s catalytic converters. Once identified, a misfire should be addressed as soon as possible. Find more info on ignition coil.
Gasoline vehicles are usually powered by a simple 12-volt DC battery. This is enough voltage to engage a starter motor and get the engine turning, but it’s not enough for actual combustion. (A spark plug needs around 40,000 volts for combustion.) That’s where the ignition coil comes in. It contains a step-up transformer (also known as a coil pack) to convert that tiny current into quick bursts of several thousand volts at a time. This electricity is then sent to each spark plug in perfect time with the cylinder’s combustion cycle, igniting fuel vapor with oxygen and producing power. Diesel engines notably lack ignition coils because they ignite their fuel using heat and pressure alone.
If it is always burned out, it will burn out soon after replacement. What is the reason? Here are some of them: First look at the problem of the generator. If the power generation is too high, the car coil will burn out if the load is too heavy, but if the power generation is really too high, then the body electrical appliances, such as light bulbs, will often be damaged; of course, The quality of the accessories is not ruled out, so it is best to measure the power generation first. Total of 8 R&D personnel in our factory, Haiyan wholesale ignition coil suppliers have more than 15 years of working experience.
The primary winding of an ignition coil will typically contain 150 to 300 turns of wire; the secondary winding will typically contain 15,000 to 30,000 turns of wire, or around 100 times more than the primary winding. The magnetic field is initially created when the vehicle’s electrical system applies approximately 12 volts to the ignition coil’s primary winding. When a spark is required at a spark plug, the ignition system will switch off the current flow to the primary winding, which will cause the magnetic field to collapse. The collapsing magnetic field will induce a voltage into the primary winding in the region of 200 volts; but the voltage induced into the secondary winding will be approximately 100 times greater, around 20,000 volts.
The first coil-based ignition system is credited to the American inventor Charles Kettering, who developed a coil ignition system for a major vehicle manufacturer around 1910/1911. For the first time, he devised an electrical system that powered the starter motor and ignition at the same time. The battery, a generator and a more complete vehicle electrical system provided a relatively stable electrical supply to the ignition coil. The Kettering system used a single ignition coil to produce a high voltage, which was passed to a rotor arm that effectively pointed the voltage to a series of electrical contacts located in the distributor assembly (one contact for each cylinder). These contacts were then connected by spark plug wires to the spark plugs in a sequence that made it possible to distribute the high voltage to the spark plugs in the correct cylinder firing order.
Haiyan engine coil wholesale manufacturer carries out strict quality monitoring and cost control on each production link of car coil, from raw material purchase, production and processing and finished product delivery to packaging and transportation. This effectively ensures the car coil of Haiyan ignition coil suppliers has better quality and a more favourable price than other products in the industry. The ignition coil wholesale manufacturer provide comprehensive and professional services such as design solutions and technical consultations based on the actual needs of customers. Find extra info on https://www.hj-auto.com/.
Haiyan car ignition coil suppliers have 200 workers, around 170 work over 4 years, with an independent long-term workflow and productivity, have one department including 30 products technology development and research. Our automotive ignition coil manufacturers cover over 14000 square meters, have been awarded city contracts and keeping promises to units, also we certify ISO9001, and TS16949 for a quality system, truly achieving the quality first, reputation first quality service for our customers at home and abroad. Kindly welcome domestic and overseas patrons to come and guide.